Get The Enabled / Disabled State Of The External Input "Stop Trigger; Set The Intensity Of The Display Backlight; Get The Intensity Of The Display Back Light - Image Engineering LED-Panel V4 User Manual

Command Line Interface (CLI)
LED-Panel.exe -setStopTrigger 1
After the execution of this command the external input "Stop Trigger" will be enabled.

6.2.18 Get the Enabled / Disabled State of the external input "Stop Trigger"

Function
getStopTrigger
Description
After the execution of the command "LED-Panel.exe -getStopTrigger" the device returns the
current activation state of the external input "Stop Trigger".
Return values
Return value Description
digital input „Stop Trigger" disabled
0
1 digital input „Stop Trigger" enabled

6.2.19 Set the Intensity of the Display Backlight

Function
setDisplayBrightness <XXX>
Description
With the function "LED-Panel.exe -setDisplayBrightness <XYZ>" the backlight illumination of
the LCD display light can be changed in 1% steps from 0% to 100%.
Parameters
XYZ – backlight intensity in steps of 1%; can be set from 0 (OFF) to 100 (fully ON).
Example
To set intensity to 24 % call LED-Panel.exe -setDisplayBrightness 24

6.2.20 Get the Intensity of the Display Back Light

Function
getDisplayBrightness
Description
Table 7
36