Get Running State; Reset Measurement; Get Camera Trigger Input State - Image Engineering LED-Panel V5 User Manual

6.2.9 Get Running State

Function
isRunning
Description
Function "LED-Panel.exe -isRunning" checks if the measurement is currently running.
Return parameters
Return value
0
1
Example
LED-Panel.exe –isRunning
After the execution of the command, the device will return the value 0 or 1, representing the
current measurement state.

6.2.10 Reset Measurement

Function
reset
Description
"LED-Panel.exe -reset" clears all the lighting LEDs and prepares the device for a new
measurement.

6.2.11 Get Camera Trigger Input State

Function
getCameraTrigger
Image Engineering
Description
the device is stopped
a measurement is running
Table 1
Seite 32 von 45