Operation Functions; Set Operation Mode - Image Engineering LED-Panel V5 User Manual

NOTE:
Options are case sensitive.
Every option must start with dash ("- ") or double dash ("--").
Example: LED-Panel -start or LED-Panel --start
Usage of option with more than one argument:
LED-Panel -setTrigger <arg1> -setTrigger <arg2>
For more information:
LED-Panel -h or LED-Panel -help
Examples:
LED-Panel.exe -setTrigger Cont
LED-Panel -setTrigger Cont
When using more than one LED-Panel connected to your PC, the desired LED-Panel must be
set as active.
Examples (addressing an LED-Panel with the serial number LP40001):
LED-Panel.exe –serial LP40001
LED-Panel –serial LP40001

6.2 Operation Functions

6.2.1 Set Operation Mode

Function
setMode <mode>
Description
"LED-Panel.exe -setMode <mode>" sets the operation mode
Seite 27 von 45
Image Engineering