Get Leds Switching Time; Start Measurement; Stop Measurement; Get Running State - Image Engineering LED-Panel V4 User Manual

Command Line Interface (CLI)

6.2.6 Get LEDs Switching Time

Function
getTime
Description
With the function "LED-Panel.exe -getTime" it is possible to read the switching time of the
device.
Return parameters
After the execution of the command "LED-Panel.exe -getTime" the device will return the cycle
duration in seconds or the index of the set time in case of exposure mode.

6.2.7 Start Measurement

Function
start
Description
"LED-Panel.exe -start" starts measurement ignoring the camera trigger input from the camera
micro switch.

6.2.8 Stop Measurement

Function
stop
Description
"LED-Panel.exe -stop" stops the measurement without resetting the LEDs.

6.2.9 Get Running State

Function
isRunning
Description
31