Get Leds Switching Time For The "Exposure Time" Mode; Trigger Iq-Trigger (Led-Panel V4 Only) - Image Engineering LED-Panel V4 User Manual

Command Line Interface (CLI)
Examples
To set the LED switching time to 1/5000s call LED-Panel.exe -setTime 15
To set the LED switching time to 1/125s call LED-Panel.exe -setTime 38

6.2.26 Get LEDs Switching Time for the "Exposure Time" Mode

Function
getTime
Description
With the function "LED-Panel.exe -getTime" it is possible to read the LED switching time of the
device in the "Exposure Time" mode.
Return parameters
After the execution of the command "LED-Panel.exe -getTime" the device will return a one- or
two-digits value XX of the switching time, where XX is the value of the switching time from the
Table 3.
For instance:
Return value 17 means that the switching time is 1/3200s.

6.2.27 Trigger iQ-Trigger (LED-Panel V4 only)

Function
setTrigger
Description
If a iQ-Trigger is connected to the LED-Panel it can be triggered by using „LED-Panel -
setTrigger <mode> -setTrigger <duration>"
<mode>
0
1
2
Description
-
Standard mode
Power mode
40