Operation Functions; Set Operation Mode; Get Operation Mode - Image Engineering LED-Panel V4 User Manual

6.2 Operation Functions

6.2.1 Set Operation Mode

Function
setMode <mode>
Description
"LED-Panel.exe -setMode <mode>" sets the operation mode
Parameters
<mode>
1
2
3
4
5
Example
LED-Panel.exe -setMode 2
After the execution of this command the LED-Panel will change into the exposure time
measurement mode.
6.2.2 Get Operat
Function
getMode
Description
"LED-Panel.exe -getMode" returns the current operation mode.
Command Line Interface (CLI)
Response time measurement [xx.x μs/ms/s]
Exposure time measurement [1/x s]
Frame rate measurement [Hz]
Rolling shutter mode
All LEDs on
i
on Mode
Description
28