Installing An M.2 Ssd - Fujitsu PRIMERGY TX1310 M5 Upgrade And Maintenance Manual

System board and components
The second hole is for M.2 SSDs with 110 mm length (see orange
circles). If necessary, move the M.2 lock to the second hole, see
"Moving the M.2 lock to the second hole" on page
15.5.2

Installing an M.2 SSD

Upgrade and Repair Unit
(URU)
Tools: tool-less
Preliminary steps
▶
"Unlocking the server" on page
▶
"Removing the bay cover" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ Remove the front fan, see
▶ If applicable, remove an expansion card, see
card" on page 119.
Moving the M.2 lock to the second hole
This step is only necessary when installing M.2 SSDs with 110 mm
length.
196
39.
40.
41.
"Removing the defective front fan" on page
Upgrade and Maintenance Manual
196.
Hardware: 5 minutes
Software: 15 minutes
42.
43.
"Removing an expansion
106.
TX1310 M5