M.2 Ssd; Slots And Bolts For M.2 Ssds - Fujitsu PRIMERGY TX1310 M5 Upgrade And Maintenance Manual

System board and components
Removing the defective TPM
▶ Remove the TPM, see
▶ Leave the TPM spacer on the bottom system board when removing the
defective TPM.
Installing the new TPM
The TPM spacer is already present on the system board.
▶ Install the TPM, see
Concluding steps
▶ Install all expansion cards, see
Ensure that you reinstall each card in the slot it was located before
the replacement.
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page 57
▶
"Installing the bay cover" on page 58
▶
"Locking the server" on page 59
▶
"Resuming BitLocker functionality" on page
You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.
15.5

M.2 SSD

15.5.1

Slots and bolts for M.2 SSDs

The system board offers two M.2 slots (Key M) with support for 80 mm and
110 mm long M.2 SSDs.
194
"Removing the TPM" on page
"Installing the TPM" on page
"Installing an expansion card" on page
50.
Upgrade and Maintenance Manual
191.
186.
56.
68.
118.
TX1310 M5