Getting Access To The Component; Safety Notes - Fujitsu PRIMERGY TX1310 M5 Upgrade And Maintenance Manual

Figure 6: Disconnecting the power cords
▶ Disconnect the power cord from the PSU (1).
▶ If applicable, disconnect the power supply of the monitor (2).
4.6

Getting access to the component

4.6.1

Safety notes

CAUTION
▶
Before removing or installing covers (except the bay cover), turn off
the server, all peripheral devices, and any other connected devices,
and unplug all power cables from the outlet. Failure to do so can
cause an electric shock.
▶
In order to comply with EMC regulations (regulations regarding
electromagnetic compatibility) and to prevent fires, the server must
not run while the side cover is removed.
▶
For more information, see
TX1310 M5
"Important information" on page
Upgrade and Maintenance Manual
Basic hardware procedures
25.
43