Removing A 3.5-Inch Hdd Module - Fujitsu PRIMERGY TX1310 M5 Upgrade And Maintenance Manual

Hard disk drives (HDD)
▶ When using a RAID array, add the additional HDD/SSD to the RAID array.
Configuring the RAID array, refer to the documentation of the RAID
controller, used in your configuration, see
on page
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶
"Installing the bay cover" on page
▶
"Locking the server" on page
7.4.2

Removing a 3.5-inch HDD module

Upgrade and Repair Unit
(URU)
Tools: tool-less
Preliminary steps
▶ If the HDD module to be removed is combined into a RAID array, please
proceed as follows:
92
22.
50.
59.
Upgrade and Maintenance Manual
"Documentation overview"
56.
57.
58.
Hardware: 5 minutes
TX1310 M5