Cables
▶ Push the bottom HDD cage back into the chassis until the fixation bolts lock
in the narrow ends of the keyhole slots.
▶ Fasten the bottom HDD cage with two screws.
▶ If applicable, install HDD1 and HDD2, see
page
90.
▶ Push the system board tray back into the chassis, see
system board" on page
▶ Connect the cables to the system board.
For more cabling information, see
page
239.
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page 57
▶
"Installing the bay cover" on page 58
▶
"Locking the server" on page 59
224
211.
50.
56.
Upgrade and Maintenance Manual
"Installing a 3.5-inch HDD" on
"Installing the new
"Supplied documents" on
TX1310 M5