Installing The Zoom Motor Kit - Christie CP2420-Xe Installation And Setup Manual

5. Remove the front lens cap.

Installing the zoom motor kit

The zoom motor kit allows for motorized adjustment of the lens.
• Do not operate the product without a lens installed.
• Always use a lens plug when installing or moving the product. This prevents contaminants from
entering the product.
• Keep fingers and other body parts away from the moving parts in the product. Tie back long
hair, and remove jewelry and loose clothing before manually adjusting the product.
1. Unpack the zoom motor kit.
2. Install the zoom motor mount onto the lens with a screw clamp.
3. Remove the cover from the zoom motor mount.
Keep the hardware and cover.
4. Install the zoom gear ring and, if required, an adapter onto the lens.
• For lens 1.8-3.0, use a small adapter.
• For lens 1.45-2.05, 2.15-3.6, 1.25-1.83:1, use a large adapter.
No other lenses need an adapter.
• For lenses: 1.6-2.4:1, 1.8-3.0:1, 2.15-3.6:1, ensure the zoom ring is against the front of
motor mount.
CP2420-Xe and CP4420-Xe Installation and Setup Guide
020-103555-01 Rev. 1 (03-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
Installing and setting up
24