Planet Networking & Communication WGSW-2620P User Manual page 18

duplex [full | half|
auto]
speed
[10 | 100 | 1000 |
auto]
speed [10| 100 |
1000 | auto]
Use the module Ethernet
interface configuration
command
Use the duplex
configuration command
to specify the duplex
mode of operation for
Fast
Interface Ethernet.
configuratio
n mode
Use the duplex
configuration command
to specify the duplex
mode of operation for
module Ethernet.
Use the speed
Interface configuration command
configuratio to specify the speed
n mode mode of operation for
Fast Ethernet.
Use the speed
configuration command
to specify the speed
Interface
mode of operation for
configuratio
module
n mode
Ethernet.
(The 100Base-FX
module only supported
Switch (config)#
interface
moduleEthernet
1/1
Switch (config)#
interface
fastEthernet 0/1
Auto
Switch (config-if)#
duplex full
Switch (config)#
interface
moduleEthernet
Auto
1/1
Switch (config-if)#
duplex full
Switch (config)#
interface
fastEthernet 0/1
Auto
Switch (config-if)#
speed 10
Switch (config)#
interface
fastEthernet 1/2
Switch (config-if)#
speed 1000