1.
Select <Edit>
2.
Radius Server IP: set the Radius Server IP address.
3.
Shared Key: set an encryption key for using during authentication sessions with the specified
radius server. This key must match the encryption key used on the Radius Server.
4.
NAS, Identifier: set the identifier for the radius client.
5.
Server Port: set the UDP destination port for authentication requests to the specified Radius
Server.
6.
Accounting Port: set the UDP destination port for accounting requests to the specified Radius
Server.
7.
Select <Apply>
3.4.8.5.3 Per Port Setting
The State provides Disable, Accept, Reject and Authorize. Use "Space" key change the state value.
Reject: the specified port is required to be held in the unauthorized state.
。
Accept: the specified port is required to be held in the Authorized state.
。
Authorized: the specified port is set to the Authorized or Unauthorized state in accordance with
。
the outcome of an authentication exchange between the Supplicant and the authentication server.
Disable: The specified port is required to be held in the Authorized state.
。
802.1x System Configuration interface