Planet Networking & Communication WGSW-2620P User Manual page 31

spanning-tree
forward-time
[seconds]
Protocol (STP)
calculations. In the
event of a loop,
spanning tree
considers the path
cost when
selecting an
interface to place
into the forwarding
state. Use the no
form of this
command to return
to the default
value.
Use the
spanning-tree
forward-time
global
configuration
command to set
the
forwarding-time for
the specified
spanning-tree
Global
instances. The
configuratio
forwarding time
n mode
determines how
long each of the
listening and
learning states last
before the port
begins forwarding.
Use the no form of
this command to
return to the
default value.
– 10
Switch (config)#
15 sec.
spanning-tree
forward-time 20