Bty. Cap.: display the battery capacity of UPS.
。
Overload: display the overload capacity of UPS.
。
Temperat.: display the current temperature of UPS.
。
UPS commands
[1] Test for 10 seconds
[2] Test until battery low
[3] Test for 5 min.
[4] Shutdown after 1 min.
[5] Shutdown af. 1m and restore of 2m
[6]. Cancel Test
[7] Cancel Shutdown
[8] Turn ON/OFF Beeper
[a] Auto Refresh
[0] Exit
Select command: enter the UPS command number in this prompt and press enter.
。
Bty. cap.: display the remain battery capacity in percentage.
。
3.4.11 POE Menu
You can view POE port information and set command to POE port.
Command
POE Information display
Description
UPS will perform the self test for 10 seconds
UPS will perform the battery test until the
battery capacity is low
UPS will perform the self test for 5 minutes
Shutdown UPS after 1 minute
Shutdown UPS after 1 minute and then
restart the UPS after 2 minutes
Cancel the any test action command
Cancel the any shutdown action command
Turn on the UPS beeper or turn off the UPS
beeper
Enabling the screen auto refresh
Exit the UPS menu mode