Planet Networking & Communication WGSW-2620P User Manual page 29

spanning-tree [on /
off] or no
spanning-tree
spanning-tree
priority [number]
spanning-tree
max-age [seconds]
Use the
spanning-tree
global
configuration
Global command to
configuratio enable Spanning
n mode Tree Protocol
(STP). Use the no
form of the
command to
restore to default
Use the
spanning-tree
max-age global
configuration
command to
Global
change the priority.
configuratio
n mode
Use the no form of
this command to
return to the
default interval.
Use the
spanning-tree
max-age global
configuration
command to
Global
change the
configuratio
interval between
n mode
messages the
spanning tree
receives from the
root switch. If a
switch does not
Switch (config)#
Disable
spanning-tree on
Switch (config)#
32768
spanning-tree priority
32767
Switch (config)#
20 sec
spanning-tree max-age
15