Enter the enable
Privileged
command while in
EXEC
user EXEC mode.
Enter the configure
Global
command while in
Configuratio
privileged EXEC
n
mode.
Enter the vlan
VLAN
database command
database
while in privileged
EXEC mode.
Enter the interface
Interface
command (with a
configuratio
specific interface)
n
while in global
configuration mode
Enter the ups
command while in
UPS
privileged EXEC
mode.
Enter the poe
command while in
POE
privileged EXEC
mode.
Enter disable to
switch#
exit.
To exit to
switch
privileged EXEC
(config)#
mode, enter exit
or end
To exit to user
switch (vlan)#
EXEC mode,
enter exit.
To exit to global
configuration
mode, enter exit.
switch
(config-if)#
To exist to
privileged EXEC
mode, or end.
To exit to
switch(ups)#
privileged EXEC
mode, enter exit
To exit to
switch(poe)#
privileged EXEC
mode, enter exit
information.
The privileged command
is advance mode
Privileged this mode to
• Display advance
function status
• Save configures
Use this mode to
configure parameters that
apply to your switch as a
whole.
Use this mode to
configure VLAN-specific
parameters.
Use this mode to
configure parameters for
the switch and Ethernet
ports.
Use this mode to UPS
parameters for the
switch.
Use this mode to POE
parameters for the switch.