Priority Queue Service settings: select the priority queue service type.
First Come First Service: the sequence of packets sent is depend on arrive order.
。
All High before Low: the high priority packets sent before low priority packets.
。
Weighted Round Ratio: select the preference given to packets in the switch's high-priority queue.
。
These options represent the number of high priority packets sent before one low priority packet is
sent. For example, 5 High: 1 Low means that the switch sends 5 high priority packets before
sending 1 low priority packet.
Qos Policy (checked for High Priority): 0~7 priority level can map to high or low queue.
。
4.7.2.3 Misc Configuration
Collisions Retry Forever: disable is in half duplex. If happen collision will retry 48 times and
。
then drop frame. Enable is in half duplex. If happen collision will retry forever.
Hash Algorithm: CRC Hash or Direct Map for MAC address learning algorithm
。
IFG Compensation: Internal Packet Gap time compensation configure. Select to "Enable" or
。
"Disable".
802.1x Protocol: enable or disable 802.1x protocol.
。
IGMP Query Mode: recognizes different queries from clients or servers to decide which
。
Switch Advanced setting interface