Planet Networking & Communication WGSW-2620P User Manual page 120

4.7.14.2 Per port Configuration
1. Select the port in Port column.
2. Select the state of port. There are four states:
。 Reject: the specified port is required to be held in the Unauthorized state.
。 Accept: the specified port is required to be held in the Authorized state.
。 Authorized: the specified port is set to the Authorized or Unauthorized state in accordance
with the outcome of an authentication exchange between the Supplicant and the
authentication server.
。 Disable: The specified port is required to be held in the Authorized state.
Apply
3. Click button.
4. You can see the every port Authorization information list in table.
4.7.14.3 Misc Configuration
1. Quiet period: Set the period during which the port doesn't try to acquire a supplicant.
2. TX period: Set the period the port waits to retransmit next EAPOL PDU during an authentication
session.
3. Supplicant timeout: Set the period of time the switch waits for a supplicant response to an EAP
request.
4. Server timeout: Set the period of time the switch waits for a server response to an authentication
802.1x Configuration - System Configuration interface
802.1x Configuration - Per Port Configuration