Planet Networking & Communication WGSW-2620P User Manual page 19

flowcontrol on or
no flowcontrol
security on or no
security
priority on [hi | low]
or no priority
for speed 100)
(The 1000Base-FX
module only supported
for speed 1000 & auto)
Use the flow control
configuration command
on Ethernet ports to
Interface
control traffic rates during
configuratio
congestion.
n mode
Use the no form of this
command to disable
security on the port.
Use the security
configuration command
Interface
on Ethernet ports.
configuratio
Use the no form of this
n mode
command to disable
security on the port.
Use the priority
configuration command
Interface
on Ethernet ports.
configuratio
Use the no form of this
n mode
command to disable
security on the port.
Switch (config)#
interface
fastEthernet 0/1
On
Switch (config-if)#
flowcontrol on
Switch (config)#
interface
fastEthernet 0/1
Disable
Switch (config-if)#
security on
Switch (config)#
interface
fastEthernet 0/1
Disable
Switch (config-if)#
priority on hi