Planet Networking & Communication WGSW-2620P User Manual page 54

1. Select the <Edit>
2. Old Password: enter the old password.
3. New Password: enter the new password.
4. Enter Again: reenter the new password for confirmation.
5. Select the <Apply>
3.4.1.4.5 SNTP Configuration
You can configure the SNTP (Simple Network Time Protocol) settings. The SNTP allows you to
synchronize switch clocks in the Internet.
SNTP Client: enable or disable SNTP function to get the time from the SNTP server.
。
UTC Timezone: set the switch location time zone.
。
Server IP: set the SNTP server IP address.
。
Password Configuration interface