Table of Contents
Advertisement
DX-D 300 U-Arm
User Manual
.
Note
4.7
DOSEMETER DEVICE (OPTIONAL)
.
Note
4.8
ARM REST (OPTIONAL)
Support
Back of the DR Detector Assembly
70
The Collimator can rotate ¦90
the same position. This movement is performed by manually turning the
Collimator and has detents every 90
When the operator rotates the Collimator, the message "Collimator Rot"
appears in the U-Arm Software Console.
Refer to the corresponding Collimator Manual for extended
information about operation or technical description needed to
maintain compliance with Standard IEC 60601- -1- -3: 2008.
The Dosemeter device "Iba Kermax Plus" is optional and compatible with the
Collimator installed in the equipment.
Refer to the corresponding Dosemeter Manual for extended
information about operation or technical description needed to
maintain compliance with Standard IEC 60601- -1- -3: 2008.
U-Arms equipped with this option are supplied with two Supports installed at the
back side of the DR Detector Assembly.
The User only has to insert the Arm Rest in one of the Supports, place it in
desired position and manually tighten the knob.
Knob
o
on its vertical axis while the Tube remains in
o
.
Arm Rest
Supports
0171F EN 20181009
Advertisement
Table of Contents
