Table of Contents
Advertisement
4.4.1.2
ROTATING THE DR DETECTOR
0171F EN 20181009
4.
To unload the DR Detector, disengage the DR Detector cable from the
Cable Clips.
5.
Grab the Handle (pressing the Brake Bar) and pull the Tray until it is
completely out.
6.
Push the DR Detector towards the end Stops and raise the DR Detector
with both hands.
The shape of the end stops is designed to house the Detector in both positions
Landscape and Portrait. With the Detector inserted in the Tray in Portrait
position and the Tray inserted in the DR Detector Assembly:
1.
Pull out the Tray to the end of its travel and pick up the DR Detector with
both hands.
2.
Turn the DR Detector 90
1
2
o
counterclockwise (Landscape position).
DX-D 300 U-Arm
User Manual
Cable Clip
o
90
65
Advertisement
Table of Contents
