DX-D 300 U-Arm
User Manual
4.4.1.1
LOADING AND UNLOADING THE TRAY
Illustration 4-10
DR Detector Loading
64
1.
Grab the Handle (pressing the Brake Bar) and pull the Tray until it is
completely out.
2.
Place the DR Detector centered in the Tray and push slightly the
end-stops with the Detector until it is fitted in the four stops of the Tray.
3.
If applicable, guide the DR Detector Cable out through the Cable Clips
to avoid damages in the Cable when inserting the Tray and fully insert
the Tray.
End Stops
Cable Clip
Detector Cable
0171F EN 20181009