AGFA DX-D 300 User Manual page 63

4.1.3 TOUCH SCREEN CONSOLE
Illustration 4-4
Touch Screen Console - Positioning Screen
Access to Programs Screen
Illustration 4-5
Touch Screen Console - Programs Screen
1.- Select the program number
with the Up and Down arrow
buttons.
2.- Press "Select", the screen
changes to Positioning screen
(with the picture of the selected
Programmed Position)
3.- Press and hold the "Move"
button for auto positioning. The
Unit positions itself in the
Programmed Position.
Access to Positioning Screen
0171F EN 20181009
Positioning Screen
Programs Screen
(press and hold for 5 seconds)
DX-D 300 U-Arm
Positioning Information
Access to Generator
Reference picture of
program number selected
Position number selection
Select Program number.
The screen goes to "Positioning"
Auto positioning Data
Access to Generator
Parameters Screen
Access to Programs Screen
User Manual
High / Low Speed
Safety Lock Button
Parameters Screen
Enable Manual
or viceversa (Auto)
55