AGFA DX-D 300 User Manual page 76

DX-D 300 U-Arm
User Manual
4.5 TUBE-COLLIMATOR ASSEMBLY POSITIONING
68
Tube-Collimator Assembly is equipped with a blocking system (on top)
consisting of a lock-lever and a ratchet. In order to change angle position of the
Tube-Collimator Assembly in relation to its transverse axis, loose the lock-lever
and lift the ratchet. Ratchet has position detents every 45
As well, when the operator rotates the Tube-Collimator Assembly, the message
"Tube Rot" appears in the U-Arm Software Console whenever the Detector
workstation is selected.
The Tube-Collimator Assembly can be clockwise rotated up
to +180 o
and counterclockwise rotated up to - -90
over these limits may damage the U-Arm cables.
o
.
o
. Rotation
o
180
o
90
0171F EN 20181009