Installation Verification; Coin Changer And Bill Acceptor (Optional) - Cafection Encore GROUND Service & Installation Manual

SERVICE & INSTALLATION MANUAL for Cafection's Encore Ground
www.cafection.com
4.12

Installation Verification

It is important to perform several brew cycles on the equipment before completing the installation. At
least two (2) cups of each product selection should be ordered to ensure that the brewer is operating
as per the specifications laid out in this manual. During this process, review the following checklist as a
reminder. Make sure that the brewer is clean, safe and functioning once it is ready to be left on-site.
What to verify
4.13

Coin Changer and Bill Acceptor (Optional)

The Encore Ground software and hardware are tested and developed using CoinCo products.
Cafection recommends using the same brand for complete compatibility.
The following models have been tested and work with the Encore Ground:
- MDB Coin acceptor 9300GX
(American coins)
- MDB Bill reader Bill Pro BP4-CRX6U
- MDB Bill reader Bill Pro BP4SX
(American bills only)
Every bill inserted will be automatically placed into the bill stack, allowing the customer to insert
multiple bills in a single transaction. That is why a customer cannot cancel the transaction and
have the bill returned. If the transaction is canceled, the value of the bill inserted will be refunded in
coins. Bills with a maximum value of $10 are accepted. Higher value bills will be returned.
The brewer must be equipped with a functional coin changer in order for the bill acceptor to work properly.
A bill will only be accepted if the coin changer contains at least the same value in coins in its tubes.
The coin changer issues coins of $0.05 or more. When setting products selling
prices, make sure to set amounts ending with a 5 or 0. For example, if a product
is sold at $1.98 and the customer inserts $2, the coin changer will not be able to
return the $0.02 due. The right selling price should therefore be set to $1.95 or
$2.00.
ENCORE GROUND Rev. 1 2021-10
800-561-6162
Inlet valve is free of leaks.
Brew chamber is empty of coffee.
Filter paper feeds without resistance and goes
straight into the waste bin.
Soluble mixing bowl is free of leaks.
Water temperature is acceptable.
Products are loaded.
Brewer and area are clean and tidy.
Verify that it is secured and not overtightened.
Verify that the unit is leveled.
Verify that the filter paper and chute are properly
installed. Repeat the installation procedures, if
needed.
Verify that it is installed straight and that the
tube is secured.
Verify water temperature.
Load products.
Clean and tidy up.
- MDB Coin acceptor 9300CGX
(Canadian coins)
- MDB Coin acceptor Guardian 6000
27