Units Of Measurement; Typographical Conventions; How To Use This Document; General Symbols And Signal Words - ABB HVC 200 Operation And Installation Manual

Table of Contents

Advertisement

1.6

Units of measurement

In this manual SI units of measurement (metric system) as well as North American
units of measurement are used. The different units are between parentheses () or in
separate columns in tables.
1.7

Typographical conventions

The lists and steps in procedures have numbers (123) or letters (abc) if the sequence
is important.
1.8

How to use this document

1. Make sure that you know the structure and contents of this document.
2. Read the safety section and make sure that you know all the instructions.
3. Do the steps in the procedures fully and in the correct sequence.
4. Keep the document in a safe location that you can easily access. This document
is a part of the EVSE.
1.9

General symbols and signal words

Signal word
Danger
Warning
Caution
Note
-
-
-
-
HVC 200/300/360-EN | 002
Description
If you do not obey the instruction, this
can cause injury or death.
If you do not obey the instruction, this
can cause injury.
If you do not obey the instruction, this
can cause damage to the EVSE or to
property.
A note gives more data, to make it easier
to do the steps, for example.
Information about the condition of the
EVSE before you start the procedure.
Requirements for personnel for a proce-
dure.
General safety instructions for a proce-
dure.
Information about spare parts that are
necessary for a procedure.
About this document
Symbol
Refer to section
1.10.
Refer to section
1.10.
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvc 300Hvc 360

Table of Contents