Table of Contents
Advertisement
2.
GETTING STARTED
2.1.
REAR PLATE DESCRIPTION
2.1.1. Rear Panel Connectors Description
COM Port:
Supported Resolution: VESA: VGA, SVGA, XGA, WXGA, SXGA, SXGA+, UXGA, WSXGA+,
Color Resolution:
Control:
Audio Out:
HDMI Out:
SFP:
2.2.
FRONT PLATE DESCRIPTION
POWER
SDI OUT:
Figure 2-1: 2430RX2-10G Rear Plate
DVI, VGA and Component cable
WUXGA, WQXGA (dual-link). CEA-861B: 480p, 576p, 720p, 1080i, 1080p
24 bits
Standard CAT5 cable (not included)
1/8" Stereo (3.5mm) Male Mini to 2-RCA Male Audio Y-Cable (not included)
Standard HDMI Cable (not included)
Figure 2-2: 2430RX2-10G Front Plate
The 2430RX2-10G comes with an auto-ranging DC voltage adapter that
automatically senses the input voltage.
connecting a 3-wire grounding type power supply cord to the power entry
module on the DC voltage adapter. The power cord should be minimum 18
AWG wire size; type SST marked VW-1, maximum 2.5m in length. The DC
cable of the voltage adapter should be connected to the DC power jack on the
rear panel.
A green LED located beside the power connector will be
illuminated when there is power applied to the 2430RX2-10G.
BNC per IEC 60169-8 Amendment 2
Revision 0.1
2430RX2-10G Series
10G Video to HDMI/SDI Converter
Power should be applied by
Page - 3
Advertisement
Table of Contents
