Getting Started; Front & Rear Plate Description; 2.1.1. Video Connection; Figure 2-1: Front Plate - evertz 2430RX-J2K-IP Series User Manual

2.

GETTING STARTED

2.1. FRONT & REAR PLATE DESCRIPTION
POWER The 2430RX-J2K-IP comes with an auto-ranging DC voltage adapter that automatically
senses the input voltage. Power should be applied by connecting a 3-wire grounding type power
supply cord to the power entry module on the DC voltage adapter. The power cord should be minimum
18 AWG wire size; type SST marked VW-1, maximum 2.5m in length. The DC cable of the voltage
adapter should be connected to the DC power jack on the rear panel. A green LED located beside the
DIP switch connector will be illuminated when there is power applied to the 2430RX-J2K-IP.
SDI OUT:

2.1.1. Video Connection

COM:
Supported Resolution:
Color Resolution:
CONTROL:
AUDIO OUT:
HDMI OUT:
JPEG2000 to HDMI Converter User Manual

Figure 2-1: Front Plate

BNC per IEC 60169-8 Amendment 2

Figure 2-2: Rear Plate

DVI, VGA and Component cable
VESA: VGA, SVGA, XGA, WXGA, SXGA, SXGA+, UXGA,
WSXGA+, WUXGA, WQXGA (dual-link). CEA-861B: 480p, 576p,
720p, 1080i, 1080p
24 bits
Standard CAT5 cable (not included)
1/8" Stereo (3.5mm) Male Mini to 2-RCA Male Audio Y-Cable (not
included)
Standard HDMI Cable (not included)
Revision 0.1
2430RX-J2K-IP
Page - 3