Table of Contents
Advertisement
Available languages
Available languages
Manual
7 Resetting network settings
In case you need to reset the network settings of Robotino
instructions.
1. Start
Start Robotino
The start up takes up to 30 seconds.
2. Resetting network settings
Press the reset key at the bottom of the control unit of Robotino
All network settings will be reset. The network name (SSID) of the access point as well as the IP address
of Robotino
the steps in the initial start up to test the network settings.
28
®
by pressing the main power switch on the control unit for about 3 seconds.
®
correspond to the specification stated on the nameplates of your Robotino
®
to the state of delivery, perform the following
®
for about 3 seconds.
© Festo Didactic GmbH & Co. KG 8029476
®
. Now perform
Advertisement
Table of Contents
