Nvram - Ricoh Aficio 2035e Service Manual

3.2 NVRAM

1. Switch the operation power switch off.
2. Switch the main power switch off.
3. Disconnect the power cord from the power supply.
4. Disconnect the network cable if the NIB option is installed.
5. Disconnect the fax cable if the fax option is installed.
6. Insert a blank IC card or SD card into the controller slot:
• B135/B138, B089/B093 require the IC card.
• B147/B149 requires the SD card.
7. Connect the power cord to the power supply.
8. Switch the main switch on.
9. Enter the SP mode.
10. Do the following SPs.
SP No.
5990 003 SMC Printout – SP
5990 002 SMC Printout – User
Programs
5824 NVRAM Data Upload
11. When the upload is finished, switch the main power switch off.
12. Disconnect the power cord from the power supply, and remove the card.
13. Replace the NVRAM. (For more details about how the replace the NVRAM,
refer to section "3. Replacement and Adjustment" in the Service Manual for the
appropriate machine.
14. Switch on the main power switch.
15. Do the following SPs:
SP No.
5801 001 Memory Clear – All Clear
5832 002 HDD Formatting – IMH
SM
Name
Prints a list of all the current User Tool
settings
Prints a list of all User Tool settings.
Uploads all SP and UT settings to the card.
Name
Clears entire memory.
Initializes documents stored on the document
server, stamp print data, scanner delivery
images, fax delivery images.
7
NVRAM
Comment
Comment
B692/B694