Ricoh Aficio 2035e Service Manual page 260

SERVICE PROGRAM MODE
5852 9* POP Server Port
Number
5852 10* POP User Name
5852 11* POP Password
5852 12* POP Auth.
Encryption
5853* Stamp Data Download
Use this SP to download the fixed stamp data stored in the firmware of the ROM
and copy it to the HDD. This SP can be executed as many times as required. This
SP must be executed after replacing or formatting the hard disks.
Note: This SP can be executed only with the hard disks installed.
5856 Remote ROM Update
When set to "1" allows reception of firmware data via the local port (IEEE 1284)
during a remote ROM update. This setting is reset to zero after the machine is
cycled off and on.
[0~1 / 0 / 1]
0: Not allowed
1: Allowed
5857* Debug Log Save Function
5857 1* On/Off (1:ON 0:OFF)
Switches the debug log feature on and off. The debug log cannot be captured until
this feature is switched on.
5857 2* Target (1:IC Card 2:HDD)
Select "1" (IC Card) if an HDD unit is not installed in the machine, or if the HDD
unit is temporarily out of service. The IC card can store only 4 MB so use the HDD
selection.
5857 3* Initialize IC Card
Initializes the IC card inserted into the controller slot. Initializing erases all data on
the IC card. Use to initialize a new card.
5857 4* Save to IC Card
Saves the debug log in memory to the IC card.
5857 5* Save to HDD
Saves the debug log in memory to the HDD.
A unique file name is generated to avoid overwriting existing file names on the SD
Card. Up to 4MB can be copied to an SD Card. 4 MB segments can be copied
one by one to each SD Card.
5857 7* HDD to IC Card (Latest 4MB)
Copies the latest 4 MB of the debug log on the HDD to the IC card. This function
erases all data from the IC card as it copies.
B135/B138
Sets the port number of the POP server.
[1~65535 / 110 / 1]
Sets the POP user name used to validate POP connection
before SMTP connection. This validation is switched on
with SP5852 6 (POP Before SMTP). Limit: 63 characters.
Sets the POP password used to validate POP connection
before SMTP connection. This validation is switched on
with SP5852 6 (POP Before SMTP). Limit: 63 characters.
Determines whether encryption is done when POP
connection is validated before SMTP connection.
[0~2 / 0 / 1]
0: Automatic
1: No. Without encryption.
2: Yes. With encryption.
0: ON, 1: OFF
1:IC Card, 2:HDD
DFU
DFU
DFU
5-44 SM