Ricoh Aficio 2035e Service Manual page 199

Code No.
726 B Finisher shift tray 1 lift motor error
Tray shift does not finish within the
specified time after the shift motor
turned on, or the stack height sensor
does not activate within the specified
time after the shift tray lift motor turned
on.
727 B Finisher stapler rotation motor error
Stapler rotation does not finish within
the specified time after the staple
rotation motor turned on, or the stapler
does not return to its home position
within the specified time after stapling
finished.
729 B Finisher punch motor error
After the punch motor is turned on, the
punch HP sensor does not activate
within the specified time.
730 B Finisher stapler positioning motor error
After the stapler motor is turned on, the
stapler does not return to its home
position within the specified time, or the
stapler HP sensor does not activate
within the specified time after the
stapler motor is turned on.
731 B Finisher exit guide open/close motor
error
After the finisher exit guide open/close
motor is turned on, the open/close
sensor does not activate within the
specified time.
732 C Finisher upper tray shift motor error
The upper tray shift motor does not stop
operation with the specified time.
733 C Finisher lower tray lift motor error
The stack height sensor does not
activate within a certain time period
after the lower tray lift motor turned on.
734 C Finisher lower tray shift motor error
The lower tray shift motor driving the
lower tray does not stop within the
specified time.
SM
Symptom
4-13
SERVICE CALL CONDITIONS
Possible Cause
• Shift motor defective or overloaded
• Shift tray lift motor defective or
overloaded
• Stapler rotation motor defective or
overloaded
• Stapler rotation motor connection
loose or connector defective
• Punch motor defective or overloaded
• Punch HP sensor defective
• Punch motor connection loose or
connector defective
• Stapler positioning motor defective or
overloaded
• Stapler HP sensor defective
• Stapler positioning motor connection
loose or connector defective
• Finisher exit guide open/close motor
defective
• Open/close sensor defective
• Upper tray shift motor defective or
overloaded
• Upper tray shift sensor defective
• Lower tray lift motor defective or
overloaded
• Upper stack height sensor defective
• Lower tray lower limit sensor
defective
• Lower tray shift motor defective or
overloaded
• Lower tray shift sensor defective
B135/B138