Output Check; Main Machine Output Check: Sp5-804 - Ricoh Aficio 2035e Service Manual

Hide thumbs Also See for Aficio 2035e:

Table of Contents

SERVICE PROGRAM MODE

5.1.7 OUTPUT CHECK

NOTE: Motors keep turning in this mode regardless of upper or lower limit sensor

signals. To prevent mechanical or electrical damage, do not keep an

electrical component on for a long time.

1. Open SP mode 5-804.

2. Select the SP number that corresponds to the component you wish to check.

(Refer to the table on the next page.)

3. Press On then press Off to test the selected item.

NOTE: You cannot exit and close this display until you press off to switch off

the output check currently executing. Do not keep an electrical

component switched on for a long time.

B135S902.WMF

Table of Contents

Aficio 2045e B135 B138