Ricoh Aficio 2035e Service Manual page 200

SERVICE CALL CONDITIONS
⇒
NOTE: SC740/741 (Booklet Finisher-related errors) are in the following section:
4.6 Reading SC 740/741 Errors from LED2. (Page 4-23) The section
describes the method for using the LED to read the details for SC740/741,
as this information is not displayed on the machine operation panel.
800 B Startup without video output end error (K)
Video transfer to the engine is started, but a
video transmission end command was not
issued by the engine within the specified
time.
804 B Startup without video input end (K)
A video transmission was requested from the
scanner, but a video transmission end
command was not issued by the scanner
within the specified time.
B135/B138
• Control board defective
• Control board defective
4-14
Rev. 04/2004
SM