Ricoh Aficio 2035e Service Manual page 250

SERVICE PROGRAM MODE
5816* Remote Service
5816 1* I/F Setting
5816 2* CE Call
5816 3* Function Flag
5816 4* Communication Test
Call
5816 5* Device Information Call
5816 6* Device Information Call
Display
5816 7* SSL Disable
5816 8* RCG Connect Timeout
5816 9* RCG Write to Timeout
5816 10* RCG Read Timeout
5816 11* Port 80 Enable
B135/B138
Switches the remote diagnostics function off and on.
[0~2 / 2 / 1]
0: Remote diagnostics off.
1: Serial (CSS or NRS) remote diagnostics on.
2: Network remote diagnostics.
Allows the customer engineer to start or end the
remote machine check using CSS or NRS by pressing
the center report key.
Enables and disables remote diagnosis via the NRS
network.
[0~1 / 0 / 1]
0: Disables remote diagnosis via network.
1: Enables remote diagnosis via network.
Executes a transmission test call for NRS. The test
returns a value in the range 0 to 99.
0: Normal end (center operating)
1: Normal end (center not operating)
Other: Abnormal
Executes a call to determine whether the machine is
operating. The test returns a value in the range 0 to 99.
0: Normal end (center operating)
1: Normal end (center not operating)
Other: Abnormal
Determines whether the item for initial setting of the
screen for the NRS device information notification call
is displayed.
0: Enabled. Item initial setting not displayed.
1: Disable. Item for initial setting is displayed.
Determines whether RCG (Remote Communication
Gate) confirmation is done by SSL during an RCG
send for the NRS via a network interface.
0: Yes. SSL not used.
1: No. SSL used.
Sets the length of time (seconds) for the timeout when
the RCG (Remote Communication Gate) connects
during a call via the NRS network.
[1~90 / 10 / 1 sec.]
Sets the length of time (seconds) for the timeout when
send data is written to the RCG during a call via the
NRS network.
[0~100 / 30 / 1 sec.]
Sets the length of time (seconds) for the timeout when
send data is written from the RCG during a call via the
NRS network.
[0~100 / 30 / 1 sec.]
Determines whether permission is granted for access
to the SOAP method via Port 80 on the NRS network.
0: No. Access denied
1: Yes. Access granted.
5-34 SM