Ricoh 2018 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Ricoh Manuals
  4. All in One Printer
  5. 2018
  6. Operating instructions manual
Ricoh 2018 Operating Instructions Manual

Ricoh 2018 Operating Instructions Manual

Printer/scanner unit scanner reference
Hide thumbs Also See for 2018:
Table of Contents

Advertisement

Quick Links

Download this manual
Printer/Scanner Unit
Network Scanner
1
Preparations for Use as a Network Scanner
2
Setting Originals
3
4
Sending Scan Files by E-mail
Using the Network Delivery Scanner Function
5
Using the Network TWAIN Scanner Function
6
Appendix
7
For safe and correct use of this machine, please be sure to read the Safety Information in the
"Copy Reference" before you use it.
Type 2018

Operating Instructions

Scanner Reference

Advertisement

Table of Contents
loading

Related Manuals for Ricoh 2018

Summary of Contents for Ricoh 2018

  • Page 1: Operating Instructions

    Using the Network Delivery Scanner Function Using the Network TWAIN Scanner Function Appendix For safe and correct use of this machine, please be sure to read the Safety Information in the "Copy Reference" before you use it. Type 2018 Operating Instructions...
  • Page 2 Introduction This manual describes detailed instructions on the operation and notes about the use of this machine. To get maximum versatility from this machine all operators are requested to read this manual carefully and follow the instructions. Please keep this manual in a handy place near the machine. The scanner function is available when the Printer/Scanner option is installed in the machine.

  • Page 3: Manuals For This Machine

    Manuals for This Machine The following manuals describe the operational procedures of this machine. For particular functions, see the relevant parts of the manual. Note ❒ The manuals provided are specific to machine type. ❒ Adobe Acrobat Reader is necessary to view the manuals as a PDF file. ❒...
  • Page 4 ❖ ❖ ❖ ❖ Manuals for DeskTopBinder V2 Lite DeskTopBinder V2 Lite is a utility included on the CD-ROM labeled "Scanner Driver & Document Management Utilities". • DeskTopBinder V2 Lite Setup Guide (PDF file - CD-ROM2) Describes the installation of DeskTopBinder V2 Lite, and the operating en- vironment for DeskTopBinder V2 Lite in detail.

  • Page 5: Table Of Contents

    TABLE OF CONTENTS Manuals for This Machine ...i How to Read This Manual ...1 Symbols ... 1 Names of Major Options ... 2 1. Network Scanner Outline... 3 E-mail ... 3 Network Delivery Scanner... 4 Network TWAIN Scanner ... 5 Control Panel...
  • Page 6 5. Using the Network Delivery Scanner Function Preparation for Delivering...51 Network Delivery Scanner Screen ... 52 Delivering Scan Files... 54 Delivery Procedure...54 Checking the Status of Delivery ... 64 6. Using the Network TWAIN Scanner Function Preparation for Using the Network TWAIN Scanner...65 Network TWAIN Scanner Screen...65 Scanning Originals ...66 Functions of the TWAIN Driver ...68...

  • Page 7: How To Read This Manual

    How to Read This Manual Symbols In this manual, the following symbols are used: Important If this instruction is not followed, paper might be misfed, originals might be damaged, or files might be lost. Be sure to read this. Preparation This symbol indicates the prior knowledge or preparations required before op- erating.

  • Page 8: Names Of Major Options

    • Auto Document Feeder → ADF • Auto Document Feeder capable of scanning both sides of a sheet → ARDF • Printer/Scanner Unit Type 2018 → printer/scanner controller The following software products are referred to using a general name: • DeskTopBinder V2 Lite and DeskTopBinder V2 Professional → DeskTop- Binder V2 Lite/Professional •...

  • Page 9: Network Scanner

    Outline By installing the printer/scanner controller, the machine can be used as a net- work scanner. As a network scanner, the machine can send scan files by e-mail, operate as a net- work delivery scanner, and operate as a network TWAIN scanner. E-mail Scan files that are attached to an e-mail can be sent using the e-mail system through a LAN or the Internet.

  • Page 10: Network Delivery Scanner

    Network Scanner Network Delivery Scanner The machine is used as a delivery scanner with ScanRouter V2 Lite/Profession- al. Scan files are stored in the delivery server and delivered to the folders of cli- ent computers on the same network. Reference p.51 “Using the Network Delivery Scanner Function”...

  • Page 11: Network Twain Scanner

    Reference For more information about ScanRouter V2 Lite, DeskTopBinder V2 Lite, or Auto Document Link, see p.i “Manuals for This Machine”. Network TWAIN Scanner The scanning function of this machine can be used from a client computer via a network (Ethernet, IEEE 1394 (IP over 1394) [optional], or IEEE 802.11b (Wire- less LAN) [optional]).

  • Page 12: Control Panel

    Network Scanner Control Panel This illustration shows the control panel when options are installed. Search Destination Facsimile Commu- Receive File nicating Immediate Trance. Start Manual Memory Reception Trance. Switch RX Mode Standard Detail Transmission Fine Stamp Shift { { { { Search Destination} } } } key Press to search for the destination from the Destination List.
  • Page 13 Quick Dial keys Press to select the registered destination with a single touch, or to enter letters and symbols. Reference For more information, see General Settings Guide. Note ❒ You can register up to 32 destinations using the Quick Dial keys. Quick Dial Flip Plate Flip this plate down to access the Quick Dial keys 01 through 16;...

  • Page 14: Reading The Display And Using Keys

    Network Scanner Reading the Display and Using Keys This section explains how to read the display and use the selection key. Note ❒ The copy screen is set as the default screen when the machine is turned on. You can change the settings in [ System Settings ]. See General Setting Guide. Selection keys Correspond to items at the bottom line on the display.

  • Page 15: Preparations For Use As A Network Scanner

    2. Preparations for Use as a To use the machine as a network scanner, you must make settings required for use as a scanner as well as basic settings for use in a network. Reference First, see General Settings Guide for details about how to make basic settings, and then make scanner settings.
  • Page 16 Preparations for Use as a Network Scanner ❖ ❖ ❖ ❖ Destination List Settings For explanations of settings, see p.14 “Destination List Settings”. Settings Destina- Destination List tion List Priority Settings Update Server Dest. List ❖ ❖ ❖ ❖ Send Settings For explanations of settings, see p.14 “Send Settings”.
  • Page 17 B B B B Select [Scanner Features] using { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { OK} } } } key. C C C C Select a menu using { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { OK} } } } key.

  • Page 18: Scan Settings

    Preparations for Use as a Network Scanner G G G G C C C C Repeat steps H H H H Press the { { { { Cancel} } } } key. The main menu appears. Scan Settings This section explains how to set the defaults for scan settings.
  • Page 19 ❖ ❖ ❖ ❖ Orig. Orientation Priority Select the default for original placement orientation. When orig- inals are always positioned the same way, select that orientation as the default to make operation easier. Reference p.31 “Original Orientation and Scan Area” ❖...

  • Page 20: Destination List Settings

    Preparations for Use as a Network Scanner Destination List Settings This section explains how to set the defaults for the destination list dis- played. The destination list settings consist of the following. For the list about set- tings and defaults, see p.9 “Scanner Features”.
  • Page 21 Note ❒ When [On] is selected, all records are deleted after print- ing. When [Off] is selected, records that exceed the limit are automatically deleted from the oldest records. ❖ ❖ ❖ ❖ Max. E-mail Size Select whether the size of an e-mail with a scan file attached is limited or not.
  • Page 22 Preparations for Use as a Network Scanner Important ❒ It is recommended that a send- er's password be set to prevent the sender's name from being misused. ❒ When [On] is selected for [Key Operator Code] in [Key Operator Tools] of [System Settings] and [On: Partial] is set for the range, enter the key operator code when [Sender's Name Default] in...

  • Page 23: Installing Software

    Installing Software The machine comes with three CD-ROMs containing various software. The CD-ROM labeled“Scanner Driver & Document Management Utilities” con- tains the necessary software to use the machine as a network scanner. The CD- ROM labeled “Printer Driver & Utilities” contains the necessary software to use the machine as a printer.
  • Page 24 Preparations for Use as a Network Scanner The installing sequence using Auto Run is as follows. Installation Sequence Insert the CD-ROM. The installer starts up. Select the software. installation complete message is displayed. Restart your PC. For information about the software that can be installed by Auto Run, see p.21 “Software Supplied on CD-ROM”.

  • Page 25: Software For Using A Network Twain Scanner

    Software for Using a Network TWAIN Scanner To use the machine as a network TWAIN scanner, it is essential to install the TWAIN driver. If you do not have applications that work with TWAIN, it is necessary to also install DeskTopBinder V2 Lite. For information about the installation of Desk- TopBinder V2 Lite, see p.21 “DeskTopBinder V2 Lite”.

  • Page 26: Software For Using The Network Delivery Scanner Function

    Preparations for Use as a Network Scanner Software for Using the Network Delivery Scanner Function To use the machine as a network delivery scanner, it is essential to install Scan- Router V2 Lite on the delivery server. To check an in-tray or retrieve files, it is necessary to install DeskTopBinder V2 Lite on the client computer.

  • Page 27: Desktopbinder V2 Lite

    DeskTopBinder V2 Lite Use Auto Run for installation. Preparation Before installation, check the system requirements for DeskTopBinder V2 Lite. See p.22 “DeskTopBinder V2 Lite”. A A A A Start Windows, and then insert the supplied CD-ROM labeled “Scanner Driver & Document Management Utilities” into the CD-ROM drive of the client computer.
  • Page 28 Preparations for Use as a Network Scanner ❖ ❖ ❖ ❖ System requirements Limitation ❒ Under Windows NT with RISC-based processors (MIPS R series, Alpha AXP, or PowerPC), this driver is not available. • Hardware PC/AT compatible • CPU Pentium or faster (Pentium 150 MHz or faster recommended) •...
  • Page 29 ❖ ❖ ❖ ❖ System requirements • Hardware PC/AT compatible • CPU Pentium 133 MHz or faster (Pentium II 266 MHz or faster recommended) • Operating system Microsoft Windows 95 (OSR 2 or later) Microsoft Windows 98 Microsoft Windows Millennium Edition Microsoft Windows 2000 Professional (Service Pack 1 or later) Microsoft Windows 2000 Server (Service Pack 1 or later) Microsoft Windows XP Home Edition...
  • Page 30 Preparations for Use as a Network Scanner ScanRouter V2 Lite ScanRouter V2 Lite is to be installed on the delivery server. Scan files can be sort- ed in the delivery server, stored in specified in-trays, or saved in folders of client computers on the same network.
  • Page 31 ❖ ❖ ❖ ❖ Software installed with ScanRouter V2 Lite • ScanRouter V2 Administration Utility ScanRouter V2 Administration Utility manages the delivery system run by ScanRouter V2 Lite. You can register destination and sender information for the scan files in the delivery server.
  • Page 32 Preparations for Use as a Network Scanner...

  • Page 33: Setting Originals

    This chapter explains the procedure for placing originals on the exposure glass and in the ADF, and setting the original scan area and orientation according to the placement method. To correctly display the top/bottom orientation of the scanned original on a cli- ent computer, the placement of the original and the settings made on the control panel and scanner driver must match.

  • Page 34: Placing On The Exposure Glass

    Setting Originals When scanning using the e-mail function or Speci- the delivery scanner fy the function orien- (Specified on the con- tation. trol panel screen) When scanning using the TWAIN scanner function (Specified in the Scan- ner Control dialog box) The original displayed on a computer Placing on the Exposure Glass...

  • Page 35: Placing In The Auto Document Feeder

    ❖ ❖ ❖ ❖ When placing the original so that the top edge touches the top left of the exposure glass When using the machine as a network TWAIN scanner, this orientation is the standard set- ting for the TWAIN driver. Nor- mally, use this orientation for placing originals.
  • Page 36 Setting Originals ❖ ❖ ❖ ❖ When placing the originals so that the top edges touch the back of the ❖ ❖ ❖ ❖ When placing the top edges of the originals first When using the machine as a network TWAIN scanner, this orientation is the standard set- ting for the TWAIN driver.

  • Page 37: Original Orientation And Scan Area

    Original Orientation and Scan Area To correctly display the top/bottom orientation of a scanned original on a client computer, original orientation must be set when placing the original. When using the e-mail function or the network delivery scanner function, settings are made on the control panel of the machine.
  • Page 38 Setting Originals ❒ The duplex function is available only when you have installed the optional ADF capable of scanning both sides of a sheet (ARDF). Orientation selection A Select [Original Orientation] using { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { OK} } } } key.

  • Page 39: For A Network Twain Scanner

    B When originals of the same width and different length are placed, select [On] using { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { OK} } } } key.

  • Page 40: Scanning Originals In Several Times Using The Exposure Glass

    Setting Originals Scanning Originals in Several Times using the Exposure Glass A A A A Place the originals. Reference p.27 “Placing Originals” Note ❒ Originals are scanned in order. Place them from the first page. B B B B Make settings for scanning area and original orientation.

  • Page 41: Preparation For Sending By E-Mail

    4. Sending Scan Files by E-mail Scan files can be sent from this machine to a specified destination using e-mail. This chapter explains the preparation for sending scan files by e-mail, various display screens, procedures for sending, and how to check the sending result when this function is used.

  • Page 42: E-Mail Screen

    Sending Scan Files by E-mail E-mail Screen These screens are shown when using the machine for e-mail . ❖ ❖ ❖ ❖ Main display ❖ ❖ ❖ ❖ When a destination is selected. E-mail icon ( ) Indicates that the E-mail screen is dis- played.

  • Page 43: Sending Scan Files By E-Mail

    Sending Scan Files by E-mail Procedure for Sending by E- mail Scan files are sent after specifying scan settings and destinations. A A A A Press the { { { { Scanner} } } } key. Search Check Destination Destination Information Scanner @.

  • Page 44: Using A Quick Dial Key To Select A

    Sending Scan Files by E-mail Using a Quick Dial key to select a destination A Press the Quick Dial key in which the destination is regis- tered. Search Check Destination Destination @. _ @. _ Shift Space Reference For more information about how to register the destina- tion, see General Settings Guide.
  • Page 45 D Select the destination using { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { OK} } } } key. E To select more destinations, re- peat steps A A A A to D D D D .
  • Page 46 Sending Scan Files by E-mail C Enter a 3-digit registration number that has been assigned to a destination using the num- ber keys, and then press the { { { { OK} } } } key. D Press the { { { { OK} } } } key. E To select more destinations, re- peat steps A A A A to D D D D .
  • Page 47 Manual entry of an e-mail address A Press [Manual]. B Enter the e-mail address. Note ❒ Letters, number, and periods can be used. The symbols ()\,;:” cannot be used. Reference For information about how to enter characters, see Gener- al Settings Guide. C Press the { { { { OK} } } } key.

  • Page 48: Registration Number

    Sending Scan Files by E-mail H H H H Specify the e-mail sender. To specify a sender, you can select it using the Quick Dial key, search for and select it from the Destina- tion List, or select it by specifying a registration number.
  • Page 49 C For receiving a return receipt confirmation, select [On] using { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { OK} } } } key.
  • Page 50 Sending Scan Files by E-mail Note ❒ When a sender's password is set, a screen for entering the sender's password appears. Enter the sender's password using the number keys, and then press the { { { { OK} } } } or { { { { #} } } } key.
  • Page 51 D Press the { { { { OK} } } } key. The “ ” message ap- Accepted pears, and then the Return Re- ceipt screen returns. E For receiving a return receipt confirmation, select [On] using { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { OK} } } } key.
  • Page 52 Sending Scan Files by E-mail Note ❒ When a sender's password is set, a screen for entering the sender's password appears. Enter the sender's password using the number keys, and then press the { { { { OK} } } } or { { { { #} } } } key.
  • Page 53 D Select the sender using { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { OK} } } } key.
  • Page 54 Sending Scan Files by E-mail Manual entry of a subject A Select [Manual Input] using { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { OK} } } } key.

  • Page 55: Checking The Status Of E-Mail

    Checking the Status of E-mail The status of the last 50 sendings can be checked. For every new sending record after 50, the oldest record is deleted. Important ❒ When the main power switch is turned off, all records are deleted. Note ❒...
  • Page 56 Sending Scan Files by E-mail...

  • Page 57: Using The Network Delivery Scanner Function

    5. Using the Network Delivery Scan files can be sent to a specified destination using the network delivery scan- ner function. This chapter explains the preparation sequence, various display screens, delivery procedures, and how to check the delivery result when this function is used.

  • Page 58: Network Delivery Scanner Screen

    Using the Network Delivery Scanner Function Set Destination Information, Sender Information, and connected devices Install Client Computer Software Network Delivery Scanner Screen These screens are shown when using the machine as a network delivery scanner. ❖ ❖ ❖ ❖ Main display ❖...
  • Page 59 ] E-mail/Network Delivery Scanner Press to switch between the network delivery scanner function and the e- mail function. [Manual] When specifying a destination that is not registered, press [Manual], and then enter the e-mail address of the destination using the Quick Dial keys. [Options] Press to make the scan settings such as resolution or scan size, the sender,...

  • Page 60: Delivering Scan Files

    Using the Network Delivery Scanner Function Delivering Scan Files Delivery Procedure Scan files are delivered after scan set- tings and destinations are specified. If necessary, you can select a sender and a subject. A A A A Press the { { { { Scanner} } } } key. Search Check Destination...
  • Page 61 Note ❒ When using ScanRouter V2 Lite/Professional , the Destina- tion List is updated automati- cally. Using a Quick Dial key to select a destination A Press the Quick Dial key in which the destination is regis- tered. Search Check Destination Destination Information...
  • Page 62 Using the Network Delivery Scanner Function D Select the destination using { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { OK} } } } key.
  • Page 63 C Enter a 3-digit registration number that has been assigned to a destination using the num- ber keys, and then press the { { { { OK} } } } key. D Press the { { { { OK} } } } key. E To select more destinations, re- peat steps A A A A to D D D D .
  • Page 64 Using the Network Delivery Scanner Function Manual entry of a destination Note ❒ When using ScanRouter V2 Pro- fessional, it is possible to enter the e-mail address of the desti- nation directly. However, set- tings for sending e-mail must be made in advance.
  • Page 65 Note ❒ When a sender is selected, the sender name is automati- cally placed in the From field of the e-mail so that the send- er can be identified by the re- cipient. Using a Quick Dial key to select a sender A Press the Quick Dial key in which the sender is registered.
  • Page 66 Using the Network Delivery Scanner Function C Enter the beginning of the sender name, and then press the { { { { OK} } } } key twice. Note ❒ Enter the first character or ch arac ters of th e s en der name.
  • Page 67 B Select [Display Destination List] using { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { OK} } } } key. C Select the sender using { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the { { { { OK} } } } key.
  • Page 68 Using the Network Delivery Scanner Function C Enter a 3-digit registration number that has been assigned to a sender using the number keys, and then press the { { { { OK} } } } key twice. D Press the { { { { OK} } } } key. The “...

  • Page 69: When Selecting A Subject From The List

    B Enter a subject, and then press the { { { { OK} } } } key. The “ ” message ap- Accepted pears, and then the Send Op- tions screen returns. Note ❒ When the subject to be en- tered exceeds 64 characters, “U”...

  • Page 70: Checking The Status Of Delivery

    Using the Network Delivery Scanner Function Checking the Status of Delivery The status of the last 50 deliveries can be checked. For every new delivery record after 50, the oldest record is deleted. Important ❒ When the main power switch is turned off, all records are deleted.

  • Page 71: Using The Network Twain Scanner Function

    6. Using the Network TWAIN This chapter describes the operations for scanning originals with the network TWAIN scanner using DeskTopBinder V2 Lite. In addition, the preparation for using the network TWAIN scanner and some functions of the TWAIN driver are introduced.

  • Page 72: Scanning Originals

    Using the Network TWAIN Scanner Function Scanning Originals This section explains how to scan originals using the network TWAIN scanner function. A A A A Start DeskTopBinder V2 Lite, and then select the scanner driver. A On the [Start] menu, point to [Program], point to [DeskTop- Binder V2], and then click [Desk- TopBinder V2].
  • Page 73 Note ❒ For advanced settings, click [Detail] to display the Detail window. For information about the Detail window, see TWAIN driver Help. C According to the settings of [Document] and [Orientation:], change the other setting of the [Document] group. Reference p.33 “For a Network TWAIN Scanner”...

  • Page 74: Functions Of The Twain Driver

    Using the Network TWAIN Scanner Function Functions of the TWAIN Driver The following is an introduction to the various functions of the TWAIN driver: ❖ ❖ ❖ ❖ Automatic Tilt Correction This function automatically cor- rects character strings that were scanned slanted.

  • Page 75: Appendix

    Relationship between Resolution and File Size Resolution and scan area are inversely related. The higher the resolution is set, the smaller the area that can be scanned. Conversely, the larger the scan area, the lower the resolution that can be set. The relationship between the scanning resolution and the file size is shown be- low.

  • Page 76: Max. Number Of Addresses Which Can Be Specified

    Appendix Max. Number of Addresses Which Can Be Specified The number of addresses which can be specified at a time when sending The number of addresses which can be registered in the list The max. number of files which can be scanned The max.

  • Page 77: Troubleshooting

    Troubleshooting This section contains advice on what to do if you have problems scanning an original, or if the network delivery scanner or e-mail function does not work. Various messages that may appear on the control panel or client computer are listed, along with causes and solutions.

  • Page 78: When An Error Message Appears On The Control Panel

    Appendix When an Error Message Appears on the Control Panel Note ❒ If an error message that is not included in this section appears, turn off the main power switch of the machine, and then turn it on again. If the message still appears, note the content of the message and the error number (if listed in the table), and contact your service representative.
  • Page 79 Message Exceeded max. page capacity. Do you want to send the scanned data? Scanned data will be cleared when selecting [No]. Exceeded max.memory capa. Scanning will be cancelled. Scanned data will be cleared. Exceeded max. memory capacity. Do you want to send the scanned data? Scanned data will be cleared when selecting [No].

  • Page 80: When An Error Message Appears On The Client Computer

    Appendix Message Specified group contains some invalid dest. Do you want to select only valid dest.? Updating destination list. Reselect destination(s) or sender's name lat- Updating destination list has failed. Try again? When an Error Message Appears on the Client Computer This section describes the main possible causes and actions for error messages displayed on the client computer when the TWAIN driver is used.
  • Page 81 Message [Clear Misfeed(s) in ADF.] [Communication error has occurred on the network.] [Error has occurred in the scanner.] [Error has occurred in the scanner driver.] [Fatal error has occurred in the scanner.] [Insufficient memory. Close all other applications, then restart scanning.] [Insufficient memory.
  • Page 82 Appendix Message [Scanner is in use for other function. Please wait.] [Scanner is not available. Check the scanner connec- tion status.] [Scanner is not ready. Check the scanner and the op- tions.] [The name is already in use. Check the registered names.] Causes and solutions A function of the machine other than the...

  • Page 83: Specifications

    Specifications Scan method Scan speed Maximum power consumption Image sensor type Scan types Interface Maximum scan size Scan sizes that can be detected au- tomatically Resolution Variable range of scan resolution File formats that can be sent by e- mail Compression method Protocol Scanning speeds vary according to machine operating conditions, computer (speci-...

  • Page 84: Index

    INDEX Automatic Tilt Correction , 68 Auto run program , 17 Checking the status of delivery , 64 Checking the Status of E-mail , 49 Compression , 14 Control Panel , 6 Default Scan Settings , 12 Delivering Scan Files , 54 Delivery Procedure , 54 Checking selected destinations , 58 Manual entry of a destination , 58...
  • Page 85 Placing Originals , 27 Placing on the exposure glass , 28 Placing original in the Auto Document Feeder (ADF) , 29 Preparation for Delivering , 51 Preparation for Sending by E-mail , 35 Preview , 67 Print & Del. Scanner Journal , 14 Printing to the image , 68 Procedure for Sending by E-mail , 37 Checking selected destinations , 41...
  • Page 86 B622-8580...
  • Page 87 Network interface cable with ferrite core must be used for RF interference suppression. Declaration of Conformity Product Name: Printer/Scanner Controller Model Number: Printer/Scanner Unit Type 2018 Responsible party: Ricoh Corporation Address: 5 Dedrick Place, West Caldwell, NJ 07006 Telephone number: 973-882-2000 This device complies with part 15 of FCC Rules.
  • Page 88 EN USA B622-8580...

Table of Contents