Ricoh Aficio 2035e Service Manual page 252

SERVICE PROGRAM MODE
5832 HDD Formatting
Enter the SP number for the partition to initialize, then press #. When execution
ends, cycle the machine off and on.
5832 1 ALL
5832 2 IMH
5832 3 Thumbnail
5832 4 Job Log
5832 5 Printer Fonts
5832 6 User Info.
5832 7 Mail RX Data
5832 8 Mail TX data
5832 9 Data for Design
5832 10 Fax
5832 11 Ridoc I / F
5833 Job Log On/Off
Switches the job log transfer on/off for Poplar server. Japan Only
Operation Panel Image Exposure
5834
Enables and disables the operation panel read (dump) feature. After powering on
the machine, set this option to 1 to enable this feature.
To reset the machine to 0, the machine must be turned off and on again. Selecting
0 for this option without cycling the power off and on does not restore the default
setting (0).
5836* Capture Settings
5836 1* Capture Function (0:Off 1:On)
With this function disabled, the settings related to the capture feature cannot be
initialized, displayed, or selected.
5836 2* Panel Setting
Determines whether each capture related setting can be selected or updated from
the initial system screen. The setting for SP58361 has priority
5836 71 to 5836 76, Copier and Printer Document Reduction
The following 6 SP modes set the default reduction for stored documents sent to
the document management server via the MLB. [0~2 / 2 / 1]
Enabled only when optional MLB (Media Link Board) is installed
5836 71* Reduction for Copy Color
5836 72* Reduction for Copy B&W Text
5836 73* Reduction for Copy B&W Other
5836 74* Reduction for Printer Color
5836 75* Reduction for Printer B&W
5836 76* Reduction for Printer B&W HQ
5836 81 to 5836 86, Stored document format
The following 6 SP modes set Sets the default format for stored documents sent
to the document management server via the MLB.
Enabled only when optional MLB (Media Link Board) is installed
B135/B138
Initializes entire content of the HDD.
Initializes 1) documents stored on the document server,
2) stamp print data, 3) scanner delivery images, 4) fax
delivery images.
Initializes MCS thumbnail images.
Initializes job data used by the Poplar server. Japan Only
Initializes printer fonts, overlay forms.
Initializes user information (UCS)
Initializes mail receive data (DCS)
Initializes mail send data (DCS)
Designer use only.
Initializes the logs (fax history and debug log)
Initializes the NetFile management area.
0: Off (disable), 1: On (enable)
0: Off (disable), 1: On (enable)
0: Disable, 1: Enable
0: Disable, 1: Enable
0: 1to-1, 1: ½, 2: 1/4
0: 1to-1, 1: ½, 0: 1/4
0: 1to-1, 1: ½, 0: 1/4
0: 1to-1, 1: ½, 2: 1/4
0: 1to-1, 1: ½, 0: 1/4
0: 1to-1, 1: ½, 0: 1/4
5-36 SM