Ricoh Aficio 2035e Service Manual page 263

5958* Feed Clutch Start Timing Adjustment, DFU
Adjusts the clutch timing to optimize the intervals between fed sheets to reduce
jams in the feed unit.
5958 1* Start Timing: Tray 1, 2
Start Timing: Tray 3, 4, LCT
5958 2*
5958 3* Leading Edge Detection
5959* 1st Print Delay Timing
Sets the amount of time the machine waits to project the latent image onto the
drum after the feed/development motor, main motor, and fusing/feed-out motor
switch on.
This setting allows the drum and hot roller to turn freely in order to allow more time
for cleaning toner and carbon that has accumulated on the hot roller strippers.
Changing this can improve image quality but can also slow down the first print
time. Adjust only when necessary.
5961* Large Capacity Exit Mode
Selects whether or not all stapled copies are sent to Shift Tray 1 when the Two-
Tray finisher is installed.
5962* 8K 16K Paper Mode
Switches on/off the use of 8-kai, and 16-kai China paper sizes.
If 'Off', 8-kai, 16-kai paper sizes are not displayed after pressing the selection key.
If 'On', 8-kai, 16-kai paper sizes displayed after pressing the selection key. For this
setting to take effect, "2" must be selected for SP5131.
With "2" (Europe) selected for SP5131, the ADF can select 16-kai LEF. With
SP5962 set for "0" (Off), the nearest size is detected as shown below.
Size Loaded
Size Detected
5967* Copy Server Set Function
Enables and disables the document server. This is a security measure that
prevents image data from being left in the temporary area of the HDD. After
changing this setting, you must switch the main switch off and on to enable the
new setting.
5970* Debug Serial Output DFU
Determines whether the debug information is output by the serial port when the machine
is powered on.
[0~1 / 0 / 1]
0: Disable
1: Enable
5974* Cherry Server
Switches writing between the Scan Router Lite application provided and the
optional full version.
SM
[35 ~ 57.5 / 42.5 / 2.5mm] DFU
35 ~ 57.5 / 42.5 / 2.5mm] DFU
[19~34 / 26.5 /2.5 mm] DFU
[0~60 / 0 / 1 s]
0: OFF, 1: ON
0: Off, 1: On.
16-kai SEF 6-kai LEF
B5 SEF B5 LEF
0: ON, 1: OFF
0: Lite, 1: Full
5-47
SERVICE PROGRAM MODE
8-kai SEF
B4 LEF
B135/B138