Replacing Side Repeater Lamp (Led Type); Replacing Stop And Tail Lamp (Bulb Type) - Kia Sorento 2022 Manual

Hide thumbs Also See for Sorento 2022:
Table of Contents

Advertisement

Maintenance
Replacing side repeater lamp (LED
type)
OMQ4070062
If the Side repeater lamp (LED) (1)
does not operate, have your vehicle
checked by a professional workshop.
Kia recommends to visit an
authorised Kia dealer/service part-
ner.
The LED lamp cannot be replaced as
a single unit because it is an inte-
grated unit. The LED lamp has to be
replaced with the unit.
A skilled technician should check or
repair the Side repeater lamp (LED),
for it may damage related parts of
the vehicle.
Replacing stop and tail lamp (Bulb
type)
OMQ4070060
1. Turn off vehicle and disconnect
the negative terminal from the
battery.
2. Open the tailgate.
3. Open the service cover.
4. Loosen the light assembly retain-
ing screws with a cross-tip screw
driver.
OMQ4070061
5. Remove the rear combination
lamp assembly from the body of
the vehicle.
6. Disconnect the rear combination
lamp connector.
Light bulbs
8
8
83

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sorento

Table of Contents