Driving your vehicle
Blind-Spot View Monitor Operation
Operating conditions
ENGINE START/STOP button is in
the OFF position
Turn signal is ON
Off conditions
ENGINE START/STOP button is in
the OFF position
Turn signal is OFF
Hazard warning flasher is ON
Other warnings pops up and takes
priority over the Blind-Spot View
Monitor
Blind-Spot View Monitor Malfunc-
tion
When Blind-Spot View Monitor is
not working properly, or the cluster
display flickers, or the camera
image does not display normally, we
recommend that you have your
vehicle inspected by an authorised
Kia dealer/service partner.
6
142
Cruise Control (CC) (if equipped)
OMQ4PH050373L
(1) Cruise indicator
(2) Set speed
Cruise Control will allow you to drive
at speeds above 30 km/h (20 mph)
without depressing the accelerator
pedal.
NOTICE
During normal cruise control opera-
tion, when the - switch is activated
or reactivated after applying the
brakes, Cruise Control will energize
after approximately 3 seconds. This
delay is normal.
NOTICE
To activate cruise control, depress
the brake pedal at least once after
turning the ignition switch or
ENGINE START/STOP button to the
ON position or starting the engine.
Cruise Control (CC)