Driving your vehicle
Warning Volume 'High', 'Medium',
'Low' or 'Off' for Smart Cruise Con-
trol.
However, even if 'Off' is selected,
the function's Warning Volume will
not turn off but the volume will
sound as 'Low'.
If you change the Warning Volume,
the Warning Volume of other Driver
Assistance systems may change.
NOTICE
If the engine is restarted, Warning
Volume will maintain the last set-
ting.
Smart Cruise Control Operation
Operating conditions
Smart Cruise Control will operate
when the following conditions are
satisfied.
Basic function
The gear is in D (Drive)
The driver's door is closed
EPB (Electronic Parking Brake) is
not applied
Your vehicle speed is within the
operating speed range
- 10 ~ 180 km/h (5 ~ 110 mph):
when there is no vehicle in front
- 0 ~ 180 km/h (0 ~ 110 mph):
when there is a vehicle in front
Smart Cruise Control (SCC)
ESC (Electronic Stability Control),
TCS (Traction Control System) or
ABS is on, but not controlling the
vehicle
Engine RPM is not in the red zone
Forward Collision-Avoidance
Assist brake control is not operat-
ing
ISG function is not operating
NOTICE
At a stop, if there is no vehicle in
front of your vehicle, the function
will turn on when the brake pedal is
depressed.
Overtaking Acceleration Assist
Overtaking Acceleration Assist will
operate when the turn signal indica-
tor is turned on to the left (left-
hand drive) or turned on to the right
(right-hand drive) whilst Smart
Cruise Control is operating, and the
following conditions are satisfied:
Your vehicle speed is above 60
km/h (40 mph)
The hazard warning flasher is off
A vehicle is detected in front of
your vehicle
Deceleration is not needed to
maintain distance with the vehicle
in front
6
6
151