Table of Contents
Advertisement
Driving your vehicle
The infotainment system has to
operate properly to use Remote
Moving Forward/Backward func-
tion.
Drive below 5 km/h (3 mph) with
the engine on to use Remote
Moving Forward/Backward func-
tion.
If the function is turned on again
after parallel parking is completed
by Remote Smart Parking Assist,
Remote Moving Forward/Back-
ward function can be used.
Check that all smart keys are out-
side the vehicle when using
Remote Moving Forward/Back-
ward function.
2. Remote Moving Forward/Back
ward
OMQ4051180
1. Press and hold one of the Forward
(
) or Backward (
the smart key. Remote Smart
Parking Assist will automatically
control the steering wheel, vehicle
speed and gearshift. The vehicle
6
204
2. Whilst Remote Moving Forward/
3. When the vehicle reaches the tar-
4. When the driver gets on the vehi-
-
) button on
Remote Smart Parking Assist (RSPA)
will move in the direction of the
button pressed.
Backward function is operating, if
the you do not hold down the For-
ward (
) or Backward (
ton, the vehicle will stop and
function control will pause. The
function will start operating again
when the button is pressed and
held again.
get location, the function will turn
off.
cle with the smart key, a message
will appear informing the driver
Remote Moving Forward/ Back-
ward function is complete on the
infotainment system screen.
In addition, when the Remote
Start (
) button is pressed on
the smart key, a message will
appear informing the driver
Remote Moving Forward/Back-
ward function is complete and the
engine will turn off.
Remote Moving Forward/Back-
ward function will operate only
when the smart key is within 4 m
(13 ft.) from the vehicle. If there
is no vehicle movement even
when the Forward or Backward
button is pressed on the smart
key, check the distance to the
vehicle and press the button
again.
) but-
Advertisement
Chapters
Table of Contents
