Kia Sorento 2022 Manual page 457

Driving your vehicle
though the warning message
does not appear on the cluster,
Blind-Spot Safety system may
not operate properly. Have the
function be inspected by an
authorised Kia dealer/service
partner.
If the rear corner radars have
been replaced or repaired, Have
the vehicle be inspected by an
authorised Kia dealer/service
partner.
Use only genuine Kia parts to
repair the rear bumper where the
rear corner radar is located.
Do not apply license plate frame
or objects, such as a bumper
sticker, film or a bumper guard
near the rear corner radar.
The function may not work prop-
erly if the bumper has been
replaced, or the surroundings of
the rear corner radar has been
damaged or paint has been
applied.
If a trailer, carrier, etc. is installed,
it may adversely affect the per-
formance of the rear corner radar
or the function may not operate.
CAUTION
For more details on the precautions
of the front view camera, refer to
"Forward Collision-Avoidance Assist
(FCA) (Sensor fusion) (if equipped)"
on page 6-78.
Blind-Spot Collision-Avoidance Assist (BCA)
Blind-Spot Collision-Avoidance
Assist Settings
Setting
Blind-Spot Safety
OMQ4AH050349
With the ENGINE START/STOP but-
ton in the ON position, select or
deselect 'Driver Assistance → Blind-
Spot Safety' from the Settings
menu to set whether or not to use
each function.
If 'Active Assist' is selected, the
function will warn the driver with
a warning message, an audible
warning, steering wheel vibration
and braking assist will be applied
depending on the collision risk lev-
els.
If 'Warning Only' is selected, the
function will warn the driver with
a warning message, an audible
warning and steering wheel vibra-
tion depending on the collision risk
levels. Braking will not be assisted.
If 'Off' is selected, the function will
turn off.
6
6 103