Replacing Front Turn Signal Lamp (Bulb Type); Replacing Front Fog Lamp (Led Type) - Kia Sorento 2022 Manual

Maintenance
Replacing front turn signal lamp
(Bulb type)
OMQ4070067
1. Turn off vehicle and disconnect
the negative terminal from the
battery.
2. Remove the socket (A) from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
OMQ4070106L
3. Remove the bulb (B) from the
socket (A) by pressing it in and
rotating it counterclockwise until
the tabs on the bulb align with the
slots in the socket. Pull the bulb
out of the socket
8 82
4. Insert a new bulb by inserting it
into the socket and rotating it
until it locks into place.
5. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assem-
bly and turn the socket clockwise.
6. Connect the negative terminal
from the battery.

Replacing front fog lamp (LED type)

OMQ4070048
If the front fog lamp (6) does not
operate, have your vehicle checked
by a professional workshop. Kia rec-
ommends to visit an authorised Kia
dealer/service partner.
Light bulbs