Replacing Side Repeater Lamp (Led Type); Replacing Stop And Tail Lamp (Bulb Type) - Kia Carnival Manual

Maintenance
Replacing side repeater lamp (LED
type)
OKA4070032
If the Side repeater lamp (LED) (1)
does not operate, have your vehicle
checked by a professional workshop.
Kia recommends to visit an autho -
rised Kia dealer/service partner.
The LED lamp cannot be replaced as
a single unit because it is an inte -
grated unit. The LED lamp has to be
replaced with the unit.
A skilled technician should check or
repair the Side repeater lamp (LED),
for it may damage related parts of
the vehicle.
Replacing stop and tail lamp (Bulb
type)
OKA4070036
1. Open the tailgate.
2. Open the service cover.
3. Loosen the light assembly retain -
ing screws with a cross-tip screw
driver.
OKA4070037
4. Remove the rear combination
lamp assembly from the body of
the vehicle.
5. Disconnect the rear combination
lamp connector.
6. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
Light bulbs
8
8 83