Lcd Display Messages - Kia Sorento 2022 Manual

Driving your vehicle
ing brake will be engaged auto-
matically. Therefore, AUTO HOLD
function should be turned off
before the ignition button is
turned off.
D (Drive)
This is the normal driving position.
To shift to D (Drive), move the dial
SBW to the D (Drive) position whilst
depressing the brake pedal.
In D (Drive), if the driver attempts to
turn off the vehicle, the vehicle is
turned OFF and shifted to the P
(Park) position automatically.
Shift-lock system
For your safety, your vehicle has a
shift-lock system which prevents
shifting the gear from P (Park) or N
(Neutral) into R (Reverse) or D
(Drive) unless the brake pedal is
depressed.
To shift from P (Park) or N (Neutral)
into R (Reverse) or D (Drive), from R
(Reverse) into D (Drive) or from D
(Drive) into R (Reverse):
1. Depress and hold the brake pedal.
2. Start the vehicle or place the
ENGINE START/STOP button in
the ON position.
3. Turn the dial SBW to the R
(Reverse) or D (Drive) position.
Automatic transmission (Dial SBW)
When the battery (12 V) is dis
charged
You cannot shift the gear when the
battery is discharged.
Jump start your vehicle (refer to
"Jump-starting" on page 7-6) or
contact an authorised Kia dealer/
service partner.

LCD display messages

If a message appears on the LCD
display, refer to the next section for
the appropriate steps to take.
Shifting conditions not met
OMQ4051004R
The message appears on the LCD
display in the following conditions:
When driving speed is too fast to
shift the gear. Decrease the vehi-
cle speed or slow down before
shifting the gear.
-
6
6 21