Replacing Rear Turn Signal Lamp, Stop And Tail Lamp - Kia Sorento 2022 Manual

Maintenance
7. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
OMQ4070055
8. Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket.
Pull the bulb out of the socket.
9. Insert a new bulb by inserting it
into the socket and rotating it
until it locks into place.
10.Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assem-
bly and turn the socket clockwise.
11.Install the rear combination lamp
assembly to the body of the vehi-
cle.
12.Install the service cover.
Replacing rear turn signal lamp,
stop and tail lamp (LED type)
OMQ4070059
If the rear turn signal lamp (2), stop
and tail lamp (1), and tail lamp (3) do
not operate, have your vehicle
checked by a professional workshop.
Kia recommends to visit an
authorised Kia dealer/service part-
ner.
The LED lamp cannot be replaced as
a single unit because it is an inte-
grated unit. The LED lamp has to be
replaced with the unit.
A skilled technician should check or
repair the stop and tail lamp (LED),
for it may damage related parts of
the vehicle.
Light bulbs
8
8 85